Drypower IFR26650 26650 Lithium Iron Phosphate Battery
Drypower IFR26650 26650 3.2V 2800mAh Lithium Iron Phosphate (LiFePO4) Battery EACH.
Drypower IFR26650 P2800 Lithium Iron Phosphate Cell.
High Power Lithium Iron Phosphate Rechargeable 26650 cell.
- Standard charge current: 560mA (0.2C5)
- Max charge current: 14000mA (5.0C5)
- Standard discharge current: 560mA (0.2C5)
- Max continuous discharge current: 42000mA (15.0C5)
- Max pulse discharge current: 84000mA (30.0C5), 3s
- Important Information Regarding Rechargeable Lithium Cells – LITHIUM ION (LiIon) & LITHIUM IRON PHOSPHATE (LiFePO4)
- Single unprotected cells are available to recognised customers. For safety information please read the section in our FAQs on battery safety
- PLEASE NOTE: All lithium rechargeable cells/packs supplied by Simpower without a Protection Circuit Module (PCM) will require a duly signed Product Indemnity Waiver (PIW) Simpower Indemnity Form Li-Ion Pack
- Do not attempt to charge these batteries using chargers for nickel based batteries or any charger not specifically designed for rechargeable lithium technology.
- This cell is manufactured for use in a battery pack assembly. It is not intended for use without a protection circuit. For equipment designed to use individual cells a protection circuit can be incorporated. Simpower current range of protected lithium ion cells can be viewed on here.
- Lithium ion cells can be assembled into single or multi-cell battery packs by authorised pack assembly centres such as our company that have been approved for safety circuit assembly and Lithium Ion pack design.
- For information on the safety circuits, more commonly known as a PCM, please click here for Protected_Circuit_Board_info or contact us.
- Simpower can also provide advice and components for intelligent Battery Management System’s (BMS) addtional to or incorporating PCM’s. It’s recommended that battery packs especially those featuring complex series/parallel cell assemblies incorporate a BMS in their construction. For further information please consult our sales engineering staff.
- For battery pack design enquiries please contact us with your requirements. If you already have some parameters please click here for a Battery Application work sheet and email it to us.
