PLB IFR26650-33A 26650 Lithium Iron Phosphate Battery

PLB IFR26650-33A 26650 3.2V 3270mAh Lithium Iron Phosphate (LiFePO4) Battery EACH.

3.2V 26650 size 3.3Ah cylindrical LiFePO4 Cell

IFR26650-33A 3.2V 3300mAh LiFePO4(LFP) lithium iron phosphate battery cell is the upgraded li-ion battery for energy storage system, which has been passed The National Mandatory Inspection and widely used in power station, house-hold energy storage system, PV street light and so on with high safety, high consistency and high reliability characteristics.

Important Information Regarding Rechargeable Lithium Cells – LITHIUM ION (LiIon) & LITHIUM IRON PHOSPHATE (LiFePO4)

• • Single unprotected cells are available to recognised customers. For safety information please read the section in our FAQs on battery safety
  • PLEASE NOTE: All lithium rechargeable cells/packs supplied by Simpower without a Protection Circuit Module (PCM) will require a duly signed Product Indemnity Waiver (PIW) Simpower Indemnity Form Li-Ion Pack
  • Do not attempt to charge these batteries using chargers for nickel based batteries or any charger not specifically designed for rechargeable lithium technology.
  • This cell is manufactured for use in a battery pack assembly. It is not intended for use without a protection circuit. For equipment designed to use individual cells a protection circuit can be incorporated. Simpower current range of protected lithium ion cells can be viewed on here.
  • Lithium ion cells can be assembled into single or multi-cell battery packs by authorised pack assembly centres such as our company that have been approved for safety circuit assembly and Lithium Ion pack design.
  • For information on the safety circuits, more commonly known as a PCM, please click here for Protected_Circuit_Board_info or contact us.
  • Simpower can also provide advice and components for intelligent Battery Management System’s (BMS) addtional to or incorporating PCM’s. It’s recommended that battery packs especially those featuring complex series/parallel cell assemblies incorporate a BMS in their construction. For further information please consult our sales engineering staff.
  • For battery pack design enquiries please contact us with your requirements. If you already have some parameters please click here for a Battery Application work sheet and email it to us.