Emergency Lighting Batteries

Why replace your entire emergency light fitting when you can have the battery repacked using the best quality high temperature emergency grade lighting cells available.

Where possible we replaces existing cells with increased capacity batteries to improve your batteries run time. Our aim in all instances is to improve the quality and performance of the batteries, so in a way, it is not battery renewal we do, it is battery enhancement.

Simpower only uses the best quality ARTS Energy (Previously SAFT) high temperature cells designed for emergency lighting use. In most instances these will give you an increase in capacity and a longer service life, unlike cheap Chinese cells.

Take charge of your battery and give is a call on 0800 746 769.

Battery Side By Side Battery stickpack

Standard configuration – “D” Size (dia=32.5mm, height=60.44mm) NiCd

Battery Pack	Pack Configuration	Nominal Volts (V)	Typical Capacity (mAh)	Standard Charge Current (mA) 16 Hrs	Standard Charge Time (Hours)	Recommended Permanent Charge Current (mA)
VTD70/2	2 CELL STICK OR SIDE BY SIDE	2.4V	4000	400	14-16	200
VTD70/3	3 CELL STICK OR SIDE BY SIDE	3.6V	4000	400	14-16	200
VTD70/4	4 CELL STICK OR SIDE BY SIDE	4.8V	4000	400	14-16	200
VTD70/5	5 CELL STICK OR SIDE BY SIDE	5.0V	4000	400	14-16	200
VTD70/10	10 CELL STICK OR SIDE BY SIDE	12.0V	4000	400	14-16	200

Standard configuration – “SUB C” Size (dia=22.4mm, height=42.3mm) NiCd

Battery Pack	Pack Configuration	Nominal Volts (V)	Typical Capacity (mAh)	Standard Charge Current (mA) 16 Hrs	Standard Charge Time (Hours)	Recommended Permanent Charge Current (mA)
VTCS/2	2 CELL STICK OR SIDE BY SIDE	2.4V	1550	150	14-16	75
VTCS/3	3 CELL STICK OR SIDE BY SIDE	3.6V	1550	150	14-16	75
VTCS/4	4 CELL STICK OR SIDE BY SIDE	4.8V	1550	150	14-16	75
VTCS/5	5 CELL STICK OR SIDE BY SIDE	5.0V	1550	150	14-16	75
VTCS/10	10 CELL STICK OR SIDE BY SIDE	12.0V	1550	150	14-16	75