Victron Energy PPP012008000 12.8V 8Ah Lithium Iron Phosphate (LiFePO4) Peak Power Pack (PPP) for High Rate Discharge Output up to 150A Continuous / 200A Pulse (10sec)
High rate 12.8V 8Ah Lithium Iron Phosphate (LiFePO4) battery module features high rate discharge output while also having built-in protection against excessive battery discharge.
Perfect for use in “movers” – caravan maneuvering systems – and other energy-intensive applications. This 8Ah model is suitable for lighter caravans. For caravans above 1000kg, see Victron models 20Ah and above.
Features:
- Lightweight and easy to install. Ideal for mobile applications.
- Effective protection against improper use. Ideal for solar power and other applications where excessive discharge might quickly cause damage to lead acid batteries.
- Dual output:
- Output 1: high capacity output for caravan movers
- Output 2: low capacity output for domestic low DC loads, eg: lighting, audio/video/ pumps, fridges (NOT available on 8Ah model)
- Dual input:
- Input 1 “car/solar”: charging while driving or charging with a solar panel. Equipped with voltage and current control for safe charging. In fact, any source of electric power can be connected to this input (e.g. a dynamo or a battery charger), as long as 11V < Vin < 25V. The current limitation is automatically set to a safe value.
- Input 2 “adapter”: the adapter supplied can be connected to this input. Battery charging current: 3A, and suitable for 110/230V power supply.
- Storage mode – Reduces power consumption to almost zero. Prevents damage by excessive discharge of the battery during storage.
- Remote control with status indicator. Push button (supplied) with a dual-colour LED status indicator:
- Short push of the button: high capacity output activated for 30 minutes (mover applications), LED red.
- Hold down for 2 seconds: high capacity output always activated, LED red, slow flashing.
- Hold down for 5 seconds: storage mode, LED blue, flashes 10 times.
- Battery is charged via input 1, LED blue, slow flashing.
- Battery fully charged, LED blue.
- Overload or overheating, LED red, flashes.
- VE.Direct port: can be connected to a PC or smartphone ('VE.Direct to USB' or 'VE.Direct Bluetooth Smart dongle' required).
- Simple operation:
- Output 1: on / 30-minute timer / off
- Output 2: on/off
- Input 1: on/off
- Scanning:
- Battery voltage
- Temperature and alarms
- Simple operation:
Specifications:
- Output 1 (mover):
- Continuous output current: 150A
- Maximum output current (10 seconds): 200A
- Short-circuit current: 300A
- Safety features: Overload, short-circuiting, temperature, excessive discharge
- Recommended charging voltage: 14V (no protection)
- Maximum charging voltage: 14.2V (no protection)
- Maximum cable diameter: 16mm² (screw clamps)
- Output 2 (domestic):
- N/A
- Input 1 (car/solar):
- Input voltage range: 11 V < Vin < 25 V
- Current limitation: 7A
- Input 2 (adaptor):
- Output voltage: 15V
- Output current: 3A
- Input voltage: 110 / 230 V 50 / 60 Hz
- Temperature (charging and discharging not possible outside the given temperature range):
- Charge: 0°C to 40ºC
- Discharge: -20°C to 40ºC
- Storage: -20°C to 40ºC