VE 12.8V 180Ah LiFePO4 Battery BAT512118610
Victron Energy BAT512118610 12.8V 180Ah Lithium Iron Phosphate (LiFePO4) Rechargeable Lithium Smart Battery with Integrated Cell Balancing and Cell Monitoring, LFP-BMS12.8/180
This Lithium Smart Battery range requires an external BMS – Click here for an overview.
High capacity 12.8V 180Ah Lithium Iron Phosphate (LiFePO4) smart battery module with built-in Bluetooth
With bluetooth capabilities, users can monitor their Victron LiFePO4 battery through the Victron Connect app (available for iOS and Android).
For Optimum efficiency, always update to the latest firmware using the Victron Connect app prior to installation.
Specifications:
- Cycle life: 2500 cycles (80% DoD), 3000 cycles (70% DoD), 5000 cycles (50% DoD)
- Max. continuous discharge current: 360A
- Recommended continuous discharge current: ≤160A
- End of discharge voltage: 11.2V
- Charge voltage: 14.0V – 14.4V (14.2V recommended)
- Float voltage: 13.5V
- Max. charge current: 360A
- Recommended charge current: ≤90A
- Operating temperature: -20°C to +50ºC
- Storage temperature: -45°C to +70ºC
- Humidity (non-condensing): max. 95%
- Protection class: IP22
Important Information:
Victron Energy LFP batteries have integrated cell balancing and cell monitoring. The cell balancing/monitoring cables can be daisy-chained and must be connected to a Battery Management System (BMS).
They can be connected in series, parallel and series/parallel so that a battery bank can be built for system voltages of 12V, 24V or 48V. The maximum number of batteries in one system is 20, which results in a maximum energy storage of 84 kWh in a 12V system and up to 102 kWh in a 24V) and 48V) system.
Battery Management System (BMS) – the BMS will:
- Generate a pre-alarm whenever the voltage of a battery cell decreases to less than 3.1 V (adjustable 2.85 V – 3.15 V).
- Disconnect or shut down the load whenever the voltage of a battery cell decreases to less than 2.8 V (adjustable 2.6 V – 2.8 V).
- Stop the charging process whenever the voltage of a battery cell increases to more than 3.75 V or when the temperature becomes too high or too
low.
The most Popular BMS is the VE Bus BMS V2 This BMS can be used to control VE bus devices such as the Victron Inverter Charger range. If not connecting to a Victron inverter charger use the smallBMS
*See product manual for more information
SHIPPING RESTRICTIONS APPLY
Due to IATA and individual airline regulations, this item may only be shipped by surface (road/sea) freight.
