Lithium Iron Phosphate 18650 cell 3.3V APR18650M1B

LithiumWerks APR18650M1-B, 3.3 Volt, 1.2 Ah Lithium Iron Phosphate (LiFePO4)

Lithium Werks was formerly A123 systems

Lithium Werks’ 18650 cells are best for Power.Safety.Life.™ applications. They deliver very high power due to their use of patented Nanophosphate® battery technology. Based on lithium iron phosphate chemistry (LiFePO4), the cells are inherently safe over a wide range of temperatures and conditions. Whether the application requires outstanding cycle life or stable float reliability, the Lithium Werks’ 18650 cells are suitable for a wide variety of power, pulse, or stand-by applications.

Nanophosphate® battery technology offers thermal-stable chemistry, faster charging, consistent output, low capacity loss over time, and superior total cost of ownership (TCO). It provides the foundation for safe systems while meeting the most demanding customer requirements. Multiple layers of protection are employed at the chemistry, cell and system level to achieve an energy storage solution with superior safety and abuse tolerance compared to metal oxide lithium-ion chemistries.

Cylindrical Cell Primary Applications

• Uninterruptible Power Supplies (UPS)
• Frequency Regulation
• Aviation / Aerospace
• Medical Devices
• Energy Storage
• Industrial Equipment
• Telecom & 5G battery back-up

Nanophosphate® LiFePO4 Benefits

• Cycle Life at 1C/1C, 100% DOD, > 4000 cycles
• Safety: Excellent abuse tolerance and environmentally friendly
• Life: Excellent calendar life, 10X cycle life vs. conventional lithium ion

More information available on Lithiumwerks pack use.

Important Information Regarding Rechargeable Lithium Cells – LITHIUM ION (LiIon) & LITHIUM IRON PHOSPHATE (LiFePO4)

• Single unprotected cells are available to recognised customers. For safety information please read the section in our FAQs on battery safety
• PLEASE NOTE: All lithium rechargeable cells/packs supplied by Simpower without a Protection Circuit Module (PCM) will require a duly signed Product Indemnity Waiver (PIW) Simpower Indemnity Form Li-Ion Pack
• Do not attempt to charge these batteries using chargers for nickel based batteries or any charger not specifically designed for rechargeable lithium technology.
• This cell is manufactured for use in a battery pack assembly. It is not intended for use without a protection circuit. For equipment designed to use individual cells a protection circuit can be incorporated. Check out Simpower’s current range of protected lithium ion cells.
• Single unprotected cells are available to recognised customers. An indemnity waiver may be required for supply to take place.
• Lithium ion cells can be assembled into single or multi-cell battery packs by authorised pack assembly centres such as our company that have been approved for safety circuit assembly and Lithium Ion pack design.
• For information on the safety circuits, more commonly known as a PCM, please click here for Protected_Circuit_Board_info or contact us.
• For battery pack design enquiries please contact us with your requirements. If you already have some parameters please click here for a Battery Application work sheet and email it to us.

SHIPPING RESTRICTIONS APPLY 

Due to IATA regulations, this item may only be shipped by road freight, unless shipped Class 9 Dangerous Goods for airfreight. Information available upon request.