Vencon Battery Analyser UBA5 UBA5-HVEP44+PSUs two channel unit PC controlled for charging/analysing all chemistries, UBA5-HVEP44

Vencon Battery Analyser UBA5 UBA5-HVEP44 PSUs two channel unit PC controlled for charging/analysing all chemistries, UBA5-HVEP44

The UBA5 is a two channel unit PC controlled for charging/analysing all chemistries. Charging style can be Peak, inflection, timed, voltage or pulse charge. For complete information on this unit please click here to go to the Vencon Website – opens in a new page.

The UBA5-EP44 can analyze up to 44V battery packs (or smaller). It comes with a small power supply (100-240VAC input) that powers the UBA5’s internal circuitry. The maximum charge current is 3A per channel.

We recommend that these Vencon battery analysers are purchased with a Temperature Probe Kit (Sold Seperately under UBA5 TP Kit or UBA5 TP Magnetic Kit).

Note : Batteries should always be tested in “Controlled” environments and for safety purposes you should never leave batteries unattended whilst being analysed.

The information within the datasheet indicates higher voltages that the UBA5-EP44 can attain as set out below.

Maximum number of cells (in series) that can be charged

NiCd/NiMH: 25

Lead acid/Gel cells: 17

Li-Ion / Li-Ion Polymer: 10

Nominal Battery Pack Voltage

NiCd/NiMH: 30V

Lead acid/Gel cells: 34V

Li-Ion / Li-Ion Polymer: 37V

40 Years Experience
SIMPOWER is at the forefront of battery technology. With 40 years of expertise and experience in research contracts, design and developing of both new technology cells and specialist industrial battery applications.

In other words from concept of cells to production manufacturing, SIMPOWER knows how to achieve customer satisfaction.

Own Manufacturing
SIMPOWER has its own manufacturing plant with state of the art welding and manufacturing equipment servicing all parts of New Zealand from the southern to northern end of the country with a quick efficient service. They offer free technical advice* on battery selection and pack design and have extensive technical advice.

SIMPOWER offers a unique facility and service of repacking battery packs for equipment which is no longer produced or perhaps difficult to source. Where possible they replace existing cells with increased capacity batteries to improved customers run time and service life if possible.

* Advice is free for the first 60 minutes, or part thereof. All subsequent advise will be billed at the SIMPOWER hourly rate or an agreed amount, subject to subsequent sales.

Exclusive
SIMPOWER has extensive knowledge and expertise of cells and battery pack build and is an exclusive distributor in NZ for SAFT, a world leader and innovator in cell technologies, as well as an approved distributor for PANASONIC, SENTRY, EVE, ARTS Energy and a supplier of FDK, DURACELL, Sonnenschein among others. SIMPOWER carries a wide range of many brands in stock and has the ability to source all leading brands from the global market place.

Contact us to discuss your requirements further.